Tuesday, March 8, 2011

[MW:10220] Filler metal Test like.. chemical, impact, al weld tensile is mandatory requirement or not As per ASME SEC 2 C, when qualifying WPS by AWS D1.1?

Dear All,

A PQR 25 mm thk is get passed tension & bend as per Table 4.2
requirement of AWS D1.1
& is it must to consider Filler metal Test like.. chemical, impact, al
weld tensile which mentioned in Asme SEC 2 C.
when qualifying WPS by AWS D1.1?

What r test is enough to pass PQR, Base metal - A36
Thk - 25mm
Filler metal - E71T.

Pl advice on above.

tnks
Srinivas

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...