Monday, March 7, 2011

[MW:10208] Re: Combination of GTAW & SMAW PQR for a WPS.

Hi all

I cleared with case 2, i can use welder in combination if they
qualified seprately.

&
@ karthik sir,

If we put seprate PQR in 12.70 mm thick = to 1/2 inch.
case 1 is possible r not?
& as per qw 200.4, pl clear me 12.70mm thickness is acceptable as 1/2
inch or not
& else may we have to go for 13 mm & above only.


@ others comments r welcomed..

Rgds
Srinivas

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...