Friday, March 4, 2011

[MW:10139] T & t conflicts?WPS is 1.5 to 14.22mm, can i qualify welder in T - 12.70 for 5 to 25.4mm ? is possible r not?

Dear all

As per ASME sec 9..
WPS in base metal T qualified is 1.5 to 14.22mm,
can i qualify a welder(WPQ) in T - 12.70 for 5 to 25.4mm ? is
possible r not?

& vice versa.
WPS is 5 to 25.4mm, can i qualify welder in 7.11 for 1.5 to 14.22mm.
is possible or not?

pl comment on above ?

Regards
Srinivas

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...