- temperature / pressure measurement generally u can follow ASTM.
second it is a general engineering practice . where you want to use
this ? only for electrodes . what is the manufacturer's
recommendations? b they say 350 degree for 1 hour / 250 degrees for 2
hours. what will be the instrument for measuring temp digital and
analogue . so =/- 2 deg not beyond control and acceptable to any body
even you can go for =/-5 degree too.
If you use vacuum baked electrodes then no need for baking / holding
ovens.
On Wed, 02 Feb 2011 13:32:12 +0530 wrote
>Dear Muthu,
Please let me know....Which standard you are refered
Noushad
On 2/2/11, muthu barathi
> Hi,
>
> It + /-5 degree C or 2% whichever is less.
>
>
> On Wed, 02 Feb 2011 10:59:52 +0530 wrote
>>Hello good morning,
>
>
>
> I need details of electrode oven calibration.
>
>
>
> How much percentage of temeparature variotion is allowable for
>
> electrode oven calibration
>
>
>
> --
>
> To post to this group, send email to materials-
welding@googlegroups.com
>
> To unsubscribe from this group, send email to materials-
> welding+unsubscribe@googlegroups.com
>
> For more options, visit this group's bolg at http://materials-
> welding.blogspot.com/
>
> The views expressed/exchnaged in this group are members personel
views
> and meant for educational purposes only, Users must take their own
> decisions w.r.t. applicable code/standard/contract documents.
>
>
>
> Dear Sir,
>
>
>
>
>
> Thanking You,
>
> Honesty is the best Policy
>
> With Warm Regards,
>
> Muthu Barathi P
> Mobile No:00962788269821 (Jordan)
> 00962775401951
>
> --
> To post to this group, send email to materials-
welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel
views and
> meant for educational purposes only, Users must take their own
decisions
> w.r.t. applicable code/standard/contract documents.
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
Dear Sir,
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment