Re: [MW:9933] Radiography

RT-1 Long Seam (A), Circum Seam(B), Nozzle to Flange(C) & Nozzle to Shell/DE(D) category Joint - Full Radiography for thickness above 38 mm - Carbon steels(P1) 19mm - LAS (P3) 16mm - LAS (P4) 0 mm - LAS (P5A,5B&5C) For Stainless steel & Non-ferrous refer particular sections of Code.   Exception to the Above : 1. Category B & C butt welds associated with Nozzles & communicating Chambers that neither exceeds NPS 10 nor 29 mm Wall thickness 2. Category D Joint forming an Corner weld instead of LIP Butt welds.   RT-2   Category A & D Butt welds - Full Radiography Category B&C Joint where intersects with Category A joint in Shell/DE - Spot radiography   RT-3     J.GERALD JAYAKUMAR 00919344954677   --- On Thu, 2/17/11, Azhar Ali <aab51214@yahoo.com> wrote: From: Azhar Ali <aab51214@yahoo.com> Subject: [MW:9918] Radiography To: materials-welding@googlegroups.com Cc: azali@olayandescon.com Date: Thursday, February 17, 2011, 7:01 PM Anybody  can describe the RT1.RT2.RT3.RT4 in an easy way.   Regards azali     -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.