Sent from my BlackBerry wireless device from MTN
-----Original Message-----
From: Engineer Mech <mengineer010@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Tue, 8 Feb 2011 01:20:31
To: Materials & Welding<materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: [MW:9780] Having GTAW, 6G, 8"Dia 5 to 25.4mm WPS, 2" welder
qualification posible or not? as per ASME Sec 9
Dear All
I am having GTAW 6G wps.
PQR dia is 8"
Thk: 5 to 25.4mm
My question is. With above WPS can i qualify welder in 2" Dia test
Piece?
either we have to consider 452.3 diameter limits.?
Tnks
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment