Yes you can use, but the machine must be calibrated.
Pankaj
On Tue, Feb 8, 2011 at 10:37 AM, <TRavikumar@flowserve.com> wrote:
Dear all
In welder qualification and new process establisment as per sec ix . weld consumabels ,test coupons &weldrs are our only using the welding m/c from the subsuplliers place is it valid for qualification .since the welding machine is not variabel
RAVIKUMAR T S
SENIOR ENGINEER-
FLOWSERVE INDIA CONTROLS PVT.LTD
PLOT#4,1A,EPIP WHITWFIELD
BANGALORE-560066,INDIA
PHONE:91-8028410289-90
FAX :91-8028410286
E-MAIL :travikumar@flowserve.com --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment