First:
I assume you for any code that was relevant made a fittness for service assessment (FFS) as per API RP 579.
You may have carried out the repairs according with ASME PPC-2, Repair of Pressure Equipment and Piping (?)
These two standards /recommended practice have certain requirements.
Then there may be some local regulations - in our country (within EU) we have a special regulation covering repair and modification of pressure equipment. The repair or modification need to be verified by an accredited inspection body and follow the assessments of PED (Directive 97/23/EC), module G. In our country the accreditation is made by the "Working Environment Authority"
The verification by the inspection body need to be done before the equipment is approved for re-use.
Outside Europe the picture may be a bit different.
regards
Kristian
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of muthu barathi
Sent: 7. februar 2011 12:32
To: materials-welding@googlegroups.com
Subject: Re: [MW:9757] sea water filter
You have not mentioned which code it is constructed. what type of
repair is carried out any weld took place if any welding then u have
to go for hydrostatic test. secondly you have to go for holiday test
for your rubber lining visual . if all ok u can accept the vessel.
On Mon, 07 Feb 2011 09:23:36 +0530 wrote
>Dear experts, We have found internal corrosion beneath the rubber
lining of sea water filter vessel. Now repair works is completed as per
our contractor. Could you please furnish me what should I check prior
to accept my vessel? The vessel made with carbon steel and the rubber
lining 5mm lined internally to avoid corrosion. I need your valuable
inputs if possible some notes.Thank you,Ilan
**********************************************************************B
orouge is a leading provider of value creating, innovative plastics
solutions for customers in the Middle East, Asia-Pacific and Africa.
Borouge employs unique Borstar® technology to produce differentiated
products for high-value infrastructure applications, including water,
gas and industrial pipe systems, power and communication cables,
advanced packaging and automotive components. Borouge’s state-of-the-
art petrochemical complex is located at Ruwais, Abu Dhabi in the United
Arab Emirates.
=======================================================================
============
>CONFIDENTIALITY NOTICEThis email and any files transmitted with it are
confidential and intended solely for the use of the individual or
entity to whom they are addressed. If you have received this email in
error please delete the email and any attachment(s) and notify the
sender.This footnote also confirms that this email message has been
scanned for the presence of computer viruses.
>======================================================================
=======================================
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
>
Dear Sir,
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment