RE: [MW:9714] details of equivalent materials list

no,
 
S275JR is a material steel plat with a minimum yield strenght of 275 mpa, but SA36 is a yild strength of mn 240 mpa. so sa 3 can not substitut the s275 steel but s275 can.
please note that if you want to replace s275 with sa36 a design calculation is required. for vice versa the des. calcs is not required.
 
best regards,
elshan.
 

---

Date: Thu, 3 Feb 2011 15:26:57 +0530
Subject: Re: [MW:9706] details of equivalent materials list
From: prashanth.hegde33@gmail.com
To: materials-welding@googlegroups.com

Dear team memers

 

• Is S 275JR  equivalent to SA 36
• Is S 275 JR+M equivalent to SA 36

 Please advise

 

Regards

 

Prashanth

 

 

On Thu, Feb 3, 2011 at 9:51 AM, bujji <chakri.cruise@gmail.com> wrote:

 

Hi,

    Vikas thanks a ton for the table & is there any similar conversion table or website for other standards to ASTM ?

 

 

Thanks & best regards,

chakri. 

 

  

On Wed, Feb 2, 2011 at 11:54 AM, vikas kumar <hindu.vikas@gmail.com> wrote:

 

Hello

           please open this website ,and your query is hopefully solve

 

http://www.tcreng.com/download/material-conversion-table.shtml

 

 

with best regards

vikas kumar

welding engineer

 

On Wed, Feb 2, 2011 at 1:57 PM, Karthik <karthik6684@yahoo.com> wrote:

 

http://www.splav.kharkov.com/steelgrade/mat_start_eu.php?name_id=10#1   or   http://www.arcelormittal.com/fce/prd_web/new_web_details.pl?code=A30&langlist=EN       Equivalent grades of grade   S355J2 (1.0577) USA - Germany DIN,WNr Japan JIS European old EN China GB Sweden SS A656 St52-3N SS490YA Fe510D2 S355J2G4 Q345D 2134-01

 

 

Thanks & Regards,

 

 

(Karthik)

 

 

Karthikeyan.S

QA/QC Manager

Getabec Energy Co.,Ltd.

379,Moo6,Soi8,Nikhomphatana,

Rayong-21180,

Thailand.

Phone: 0066 38 897035-8 (Off)

Fax: 0066 38 897034

Hand Phone: 0066 892512282

 

--- On Wed, 2/2/11, bujji <chakri.cruise@gmail.com> wrote:

 

From: bujji <chakri.cruise@gmail.com>

Subject: [MW:9676] details of equivalent materials list

To: materials-welding@googlegroups.com

Date: Wednesday, February 2, 2011, 2:51 PM

 

 

Hi All,

         can anyone give me the details of equivalent materials list ?

 

For eg : S355k2+N is EH-36 (40 MM plates)

 

 

S355 J2 is equivalent to ----------- ??? (round bar dia  70 mm)

 

 

Regards,

chakri.

--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

 

--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

 

--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

 

--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.