Dear all
In welder qualification and new process establisment as per sec ix . weld consumabels ,test coupons &weldrs are our only using the welding m/c from the subsuplliers place is it valid for qualification .since the welding machine is not variabel
RAVIKUMAR T S
SENIOR ENGINEER-
FLOWSERVE INDIA CONTROLS PVT.LTD
PLOT#4,1A,EPIP WHITWFIELD
BANGALORE-560066,INDIA
PHONE:91-8028410289-90
FAX :91-8028410286
E-MAIL :travikumar@flowserve.com --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.
Hello, Please see the response below. Regards. P. Goswami, P. Eng, IWE. From: materials-welding@googlegroups.com <materials-weld...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment