Monday, February 28, 2011

[MW:10056] Re: basic funda

Hi

The main reason is that the mechanical properties are better in the
rolling direction compare to transverse direction.
But it is not mandatory that you weld in this way.
If you weld the material in the way wht u r asking may be possible
that you will get lesser strength or other required things
as compare to long. side welding.

Regards
Sandeep

On Feb 28, 5:29 am, "Kathalingam Babu" <kathalingam.q...@ppl.com.sg>
wrote:
> Hi
>
> It is only optional, not mandatory in many codes.
>
> Due to the fact that, there is variation in mechanical properties in Trans
> direction.
>
> Thanks & Regards,
>
> K. Babu
>
>
>
> ----- Original Message -----
> From: "Pratik Kshirsagar" <pratiks...@gmail.com>
> To: "Materials & Welding" <materials-welding@googlegroups.com>
> Sent: Sunday, February 27, 2011 12:08 AM
> Subject: [MW:10030] basic funda
>
> > Dear all,
> >          I am having a simple question which seems to be stupid but
> > just it's the basic thing. I want to know why to weld a plate in the
> > direction of rolling? What happens if the welding is carried out in
> > transverse direction that of rolling?
>
> > --
> > To post to this group, send email to materials-welding@googlegroups.com
> > To unsubscribe from this group, send email to
> > materials-welding+unsubscribe@googlegroups.com
> > For more options, visit this group's bolg at
> >http://materials-welding.blogspot.com/
> > The views expressed/exchnaged in this group are members personel views and
> > meant for educational purposes only, Users must take their own decisions
> > w.r.t. applicable code/standard/contract documents.- Hide quoted text -
>
> - Show quoted text -

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...