Monday, January 31, 2011

Re: Re: [MW:9587] Expiry period for SMAW consumable-reg

It is as per manufacturer's recommendation

no codes define


On Mon, 31 Jan 2011 11:15:12 +0530 wrote
>





Hi

There is no expiry date for the consumables.

You can use the consumables , as long as the condition is
good.

May be you need to get approvals for the batch's if the
approval is expired for the concerned consumables lot

Thanks & Regards,

K. Babu

>----- Original Message -----

From:
Suresh

To: materials-welding@googlegroups.com

Sent: Monday, January 31, 2011 1:15
PM
Subject: Re: [MW:9575] Expiry period for
SMAW consumable-reg

>
Hii

Generally Consumable expiry date is up to 2 monsoons,or Manufacturer
should specify in Batch/Lot certificate .
>
>
On Mon, Jan 31, 2011 at 9:35 AM, Pandiaraj
wrote:
>
Dear Experts,
> generally what is expiry
period for SMAw consumables (Flux coated) dose ASME Sec II-C refers
regarding this, if so please refer which class.in the consumable
wraper only manufactured date is
given but not the expiry date.
>
>Thanks &
Regards,
>
>K.Pandiarajan.
>
>
>--
>To post
to this group, send email to materials-welding@googlegroups.com
>To
unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>For
more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>The views
expressed/exchnaged in this group are members personel views and
meant for
educational purposes only, Users must take their own decisions
w.r.t.
applicable code/standard/contract
documents.
>
>
>--

>Thanks & Best Regards,
>
>Suresh
>
>Mobile No: 91-92 92
905 905
>
>
--
>To post to this group, send email to
materials-welding@googlegroups.com
>To unsubscribe from this group, send
email to materials-welding+unsubscribe@googlegroups.com
>For more options,
visit this group's bolg at http://materials-welding.blogspot.com/
>The
views expressed/exchnaged in this group are members personel views
and meant
for educational purposes only, Users must take their own decisions
w.r.t.
applicable code/standard/contract documents.
>



--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
>


Dear Sir,





Thanking You,

Honesty is the best Policy

With Warm Regards,

Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...