Monday, January 31, 2011

Re: [MW:9601] P1 no Range

Dear Puneet,
 
IS 2062 Gr A, is unlisted , but max. properties were equalent to P1. but while preparing WPS/PQR use Material Spec as IS 2062 GrA .
 
SS 410 is Martensitic Steels, its P No is 6

On Sun, Jan 30, 2011 at 8:04 PM, puneet takiar <puneet1takiar@yahoo.com> wrote:
Hello!
Can anybody tell me in which P. no IS 2062 grade A and SS 410 will fall and how to search in ASME sex IX table.
Regards, 

puneet takiar





From: Karthik <karthik6684@yahoo.com>
To: materials-welding@googlegroups.com
Sent: Fri, 7 January, 2011 1:46:08 PM
Subject: Re: [MW:0] P1 no Range

Hi,
Please refer QW423 also QW 350 for essential variables.

Thanks & Regards,

(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Fri, 1/7/11, sn vl <weldinspn@gmail.com> wrote:

From: sn vl <weldinspn@gmail.com>
Subject: [MW:9122] P1 no Range
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Friday, January 7, 2011, 2:43 PM

Hi..

How to find in ASME sec IX P no to Pno qualification range.
Eg : If a welder qualified for P1to P1
what is the Range qualified As per Sec IX.
Where is given in CODE.


Regards
SN.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...