Monday, January 31, 2011

Re: [MW:9599] Hoe to select Flange's rating and class

Dear Saamy,
 

1- Flange material shall be selected based on service conditions (fluid properties such as corrosiveness, temperature, hydrogen contents,...).

2- Based on design pressure, design temperature and material of construction the flange rating shall be selected according to pressure/temperature rating tables of ASME b16.5.

Based on my long experience on this matter I found that working with pressure/temperature rating tables of ASME b16.5 is not so easy and accurate. So I converted these tables to the graphs which is in attached as a pdf file for your convenience.

 

Hope it will be useful for you.

 

Regards,

Karandish



From: muthu barathi <muthu_barathi@rediffmail.com>
To: materials-welding@googlegroups.com
Sent: Mon, 31 January, 2011 1:32:49 PM
Subject: Re: [MW:9592] Hoe to select Flange's rating and class

Hi,
You have to refer your LDT (Line designation table) and P & ID (Process
instrument diagram).



On Mon, 31 Jan 2011 10:49:05 +0530 wrote
>Dear All!

Could you explain me how to select flange ratings and class against

service, temp, and pressure?



Thanks!



Saamy



--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-
welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.



Dear Sir,





Thanking You,

Honesty is the best Policy

With Warm Regards,

Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...