Wednesday, January 26, 2011

Re: [MW:9473] Re: selction of filler rods for similar and dissimilar metals

HI,
Its a collective information and details from Manufacturers catalog and code book.

Thanks & Regards,

(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Wed, 1/26/11, Weldbro <itsashishwalia@gmail.com> wrote:

From: Weldbro <itsashishwalia@gmail.com>
Subject: [MW:9468] Re: selction of filler rods for similar and dissimilar metals
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Wednesday, January 26, 2011, 12:02 AM

Dear karthikeyan

Many thanks for your valuable info on material selection. can you
tellme the source of this selection chart.

regards

weldbro



On Jan 19, 1:02 pm, praveen nair <praveen_nair9...@yahoo.co.in> wrote:
> dear members,
>
> i m involved in construction of furnaces and pressure vessel. kindly help me by providing some details about the selection of filler wire and rods for similar and dissimilar metals

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...