Tuesday, January 25, 2011

Re: [MW:9439] 9330] selction of filler rods for similar and dissimilar metals

Dear Pravean,

Please specify the material you want to weld and conditions such as mechanical properties to be achieved, PWHT or not.

if you could detail, what you are looking for, probably you would get better response.


Regards
Manpreet Singh



On Mon, 24 Jan 2011 17:13:38 +0530 pravean ashok wrote
>
Dear sir
 
can provide me reference for this electrode selection ..
>
regards
pravean
>
On Sat, Jan 22, 2011 at 8:50 AM, Mahmood Akbari <m.akbari@odcc.ir> wrote:
>

Dear Parveen

 

Please find attached file in this regard.

 

Regards

M. Akabari

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of praveen nair
>Sent: Wednesday, January 19, 2011 2:33 PM
>To: materials-welding@googlegroups.com
>Subject: [MW:9330] selction of filler rods for similar and dissimilar metals

 


>dear members,
>
>i m involved in construction of furnaces and pressure vessel. kindly help me by providing some details about the selection of filler wire and rods for similar and dissimilar metals

 

--
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>

>

--
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...