Friday, January 21, 2011

Re: [MW:9375] Double V

Only thing you can do is wele with single V, then grind the root &
weld the grinded portion. If you see the macro section, it will look
almost double V.

On 1/21/11, Elshan Feyzullayev <elshan_f@hotmail.com> wrote:
>
> it is not practical to do double vee on 4 mm plate. even no V is required
> for this thicknesses as the square butt weld joint confisuration are also
> aceptable.
>
> regards,
> elshan.
>
> Date: Fri, 21 Jan 2011 14:17:57 +0530
> Subject: [MW:9367] Double V
> From: pushprajanand34@gmail.com
> To: materials-welding@googlegroups.com
>
> CAN ANY BODY TELL ME THE PROCEDURE OF MAKEING DOUBLE V ON 4 MM STAINLESS
> STEEL PLATE
> --
> Regards,
> Pushpraj Anand
>
>
>
>
> --
>
> To post to this group, send email to materials-welding@googlegroups.com
>
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
>
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
Sent from my mobile device

Sukamal

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...