Tuesday, January 18, 2011

Re: [MW:9279] PQR of for SAW process

Hi,
You haven't mention the Speciment thickness,so cant tell you the no.of test specimen required.
You can refer with QW451.1 for the test specimen and no.of tests required according to thickness.

Thanks & Regards,

(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Tue, 1/18/11, siva prasad <siva_chinnam@yahoo.co.in> wrote:

From: siva prasad <siva_chinnam@yahoo.co.in>
Subject: [MW:9277] PQR of for SAW process
To: materials-welding@googlegroups.com
Date: Tuesday, January 18, 2011, 10:40 AM

Dear all,
we have carried out PQR for SAW process and need to send the test piece for mechanical tests.
Suggest me the number number of tensile,side bend pieces to be cut from the test piece as per Sec IX.Also mention the QW number from the code.
 
Regards
CH.V.Siva Prasad

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...