Hi, Wash pass is a just fusion pass without addition of filler material. i t is recommended over at least one pass with filler (625 overlay etc) Regards, Ajay
--- On Mon, 17/1/11, fariza a rahman <fariza.arahman@gmail.com> wrote:
From: fariza a rahman <fariza.arahman@gmail.com> Subject: [MW:9247] Wash Pass To: materials-welding@googlegroups.com Date: Monday, 17 January, 2011, 12:46 AM
Hi all...
Anybody know about wash pass.What material can use this technique and what effect of this.Can use for cladding(Inc 625),buttering(13.40) to base material F22?
TQ. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment