Monday, January 17, 2011

Re: [MW:9274] Difference between SA 106 and SA 333 Gr 6

grain structure change in both materials
i.e. LTCS materials having fine austenitic grain sturcture & High temp CS materials having Coarse grain sturcture

On Sun, 16 Jan 2011 22:03:25 +0530 wrote
>Dear Experts!

Could you explain how to determined these 2

materials as High Temp CS and Low Temp CS, because of these materials

chemical properties as well as same?



Advance Thanks!





Saamy



--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...