Dear Sujay, As per to the base metal grouping (ASME SEC IX QW-423.1),F number grouping (QW-432) no changes and so no need of separate qualification, but check other essential variables regarding welder performance refer QW-416. With Regards, P.Balajirajan. -------Original Message------- Dear All, Welder is qualified in SS material,it required separately to be qualified for Duplex SS material. thanks and regards To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. |
Sunday, January 16, 2011
Re: [MW:9242] WQT for Duplex SS
Subscribe to:
Post Comments (Atom)
Re: [MW:34913] Filler wire
E71T-1C is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment