Monday, January 10, 2011

Re: [MW:9176] SS Vessels

Answer for que:1.PT for Bevels
Answer for que:2.Acid Etching Test Required.
 
Regards,
SURESH.

On Mon, Jan 10, 2011 at 4:37 AM, Idris Mohiuddin <idrismohi@gmail.com> wrote:
Dear Experts,
 
Please throw some light on the following query:
 
1. As per ASME Sec VIII Div 1, is any specific NDE required for SS vessels greater than 3/4 inch thickness?
 
2. As per ASME Sec VIII Div 1, After cutting back the cladding of a clad plate vessel, what test is required before welding an internal attachment?
 
Regards
 
MIM

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...