Sunday, January 9, 2011

Re: [MW:9154] Weld Repair

Dear Taufiq,
 
Doing welding many time at the same location, the base matel mechnical properity well get change. To avoid the properity change, better to cut and reweld.
 
regards
 
Samy

On Sat, Jan 8, 2011 at 4:34 AM, Taufiq <taufiq_civ@yahoo.com> wrote:
Dear all,

Our client specification clearly stated that filler and cap weld may
be repaired a maximum of 2 times using qualified procedure. I will
appreciate if anyone can tell me what is going on if we repair the
weld for more than 3 times?

Thank you and regards,

taufiq

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...