Monday, January 3, 2011

Re: [MW:9059] RE: 9054] UT of Fillet weld

If full penetration joint than you can do UT by angle probe.

Regards

Kamaleshwar Kumar Sahu AGM(QA&I) Cell: +91 97520 99054 BEEKAY ENGINEERING
CORPORATION 45/47, Industrial Estate, Bhilai (C.G.), INDIA Tel: +91 788
4082240 (D) /4082200 Fax: +91 788 4082288/99 E-Mail:
kamaleshwar.sahu@beekaycorp.com Web: www.beekaycorp.com P Please consider
the environment before printing my email
----- Original Message -----
From: "Firman Bhaktiwinaya" <firman.bhaktiwinaya@profab-group.com>
To: <materials-welding@googlegroups.com>
Sent: Monday, January 03, 2011 2:02 PM
Subject: [MW:9055] RE: 9054] UT of Fillet weld


> Does we need UT for fillet welds ? could you tell me more as per client
> spec or Code req. ?
>
> Regards,
> Firman Bhaktiwinaya
>
> -----Original Message-----
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of Sadique Sheikh
> Sent: Monday, January 03, 2011 3:10 PM
> To: materials-welding@googlegroups.com
> Subject: [MW:9054] UT of Fillet weld
>
> Dear All,
> During UT inspection of fillet weld, Does we need both angle probe and
> normal or TR probe?
>
> Thanks & Regards,
> Mohd. Sadique Sheikh
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views
> and meant for educational purposes only, Users must take their own
> decisions w.r.t. applicable code/standard/contract documents.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...