Welding aluminium is different from welding carbon steel .
YOu must have 4 weels with circular groove + liner in teflon
GMAW is the best because you will earn in time.
Better solution is to work with inverters machines with specail synergic
line for aluminium ( you can check www.fronius.com , they have special
aluminium machine TRANSPULSYNERGIC 2700 ALU EDITION)
Kind regards
MOez
----- Original Message -----
From: "durga bala suresh" <sureshndb@gmail.com>
To: <materials-welding@googlegroups.com>
Sent: Tuesday, December 07, 2010 1:02 PM
Subject: [!! SPAM] [MW:8571] aluminium welding
> Dear Members,
> We are using MIG welding for carbon steel.
> We would like to weld aluminum(min 6mm to max 10 mm) with the same
> process.
> Is it required to change liner and wire feed rollers?
> What type of shielding gas to be used?
> What are the precautions to be taken during welding?
> What type of defects we can encounter?
> Which process is best SMAW or GMAW?
>
> Please advice in this regard.
> thanks and regards,
> Suresh
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment