Monday, December 20, 2010

Re: Re: [MW:8836] ACCEPTANCE STANDARD FOR PRESSURE VESSELS


Hang on guys !
Please read the question put up by kumar carefully.

He needs to know the acceptance criteria to be followed during welder and welding qualification for mechanical tests and VE.
The answer is definately ASME Sec IX.

If impact test is also required then he has to refer to Sec VIII. or his design code.

Regards

Prem Nautiyal

On Mon, 20 Dec 2010 09:02:02 +0530 wrote
>Dear Pandithan,
>
>ASME sec ix doesn't specify acceptable standards for pressure vessels, you need to check what is design code for Pressure vessels, so Please mention Design code then we can provide code reference.
>
>Regards
>Manpreet Sigh
>Welding Engineer
>
>
>On Mon, 20 Dec 2010 08:28:03 +0530 Ashwani Dogra wrote
>>Dear Sir
>>
>>ASME Sec IX tells about onlyQualification standard for Welding and Brazing Procedures,Welders,Brazers and Welding andBrazing Operatorsand is not coveredthe Acceptance Standard. Acceptance Standard for pressure vessel is covered in design code.
>>
>>WIth regards
>>
>>Ashwani
>>
>>

Date: Sun, 19 Dec 2010 21:10:48 +0530
>>Subject: Re: [MW:8809] ACCEPTANCE STANDARD FOR PRESSURE VESSELS
>>From: kgpandithan@gmail.com
>>To: materials-welding@googlegroups.com
>>
>>
For qualification of welders & welding operators follow only ASME sec IX acceptance, and more over qualification test are being given with ref to qualified WPS, and no impqct for welders, it is only for procedures
Dear Members, ur active participation is highly appriciated and at the same time , request members to give almost correct answers otherwise it will mislead
Thanks
Pandithan
In-Charge/Welding Technology
Cethar Vessels Ltd

>>
>>
On Sat, Dec 18, 2010 at 3:05 PM, KUMAR wrote:
>>
Dear Sir,
>>
>>In pressure vessel fabrication during welder and welding
>>qualification, which acceptance standard we should follow for
>>mechanical test and weld visual inspection whether ASME SEC VIII OR
>>IX.
>>
>>--
>>Thanks & Regards
>>M.Kumar
>>
>>--
>>To post to this group, send email to materials-welding@googlegroups.com
>>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>>
>>
>>--
>>To post to this group, send email to materials-welding@googlegroups.com
>>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>>
--
>>To post to this group, send email to materials-welding@googlegroups.com
>>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>>




--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>


PREM S NAUTIYAL
CELL : 9769316004

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...