i had an idea about 5-12mm w/o impact considering QW-200.4(b), but can you please throw some focus on (6-12mm)
I am sure, i am missing something, Can you please calrify?
Regards
Manpreet Singh
On Wed, 29 Dec 2010 12:57:26 , "Bathula Raghuram (Mumbai - PIPING)" <R.Bathula@ticb.com> wrote
5-12mm w/o impact, else 6-12mm
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of manpreet
Sent: Wednesday, December 29, 2010 12:03 PM
To: materials-welding
Subject: [MW:8974] Combination of PQR for WPS
Dear All,
Procedure qualification as per ASME sec ix,
I have 2 PQR:-
*PQR 1- GTaw-6mm thick
*PQR 2- Smaw- 15 mm thick
What would be the thickness renge for base and weld metal?
for combined WPS, base metal thickness range shall be 1.5mm to 30mm, am i correct?
Regards
Manpreet Singh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-- To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment