Friday, December 24, 2010

Re: [MW:8934] Ultrasonic test for 3mm , 5 mm thick stainless sheetsheet

yes possible,
but difficult and need very skilled operator also require different technique.
it is  not possible  with the conventional method we use in daily use.
 
 
asif
 
 


--- On Fri, 24/12/10, Kisan Gamane <kisankrishna1506@gmail.com> wrote:

From: Kisan Gamane <kisankrishna1506@gmail.com>
Subject: [MW:8932] Ultrasonic test for 3mm , 5 mm thick stainless sheetsheet
To: materials-welding@googlegroups.com
Date: Friday, 24 December, 2010, 11:07 AM

Dear All
 
Is it posible to do Ultrasonic test for 3mm , 5 mm   thick stainless sheetsheet. Kindly give advice .
 
Thanks in advance.

--

किसन गामणे

नाशिक

जन्मलो म्हणून जगणार नाही
अन असाच राखेत विरणार नाही...
ठसे सोडूनी जाईन जीवन काठावरती
आल्या लाटा कितीही , मिटणार नाही ...

 

खुभी नाही माझ्यात एवढी  कि..!
कुणाच्या  हृदयात ठाण  मांडून  जाईल..!
पण विसरणे सुद्धा अशक्य होईल..!
असे  क्षण  देऊन जाईल.......!

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...