You can choose closing joint geomatry with backing strip. RT is possible.
Paresh Patel
On Fri, 24 Dec 2010 12:08:38 +0530 wrote
>Dear All,
We need to fabricate a pressure vessel with 1200mm OD and 2000mm height and 16mm thickness with dishend at both end of shell.This vessel is having 100% RT and there is no manhole .Now what must be the closing joint weld geometry and will it be possible to do RT for the closing joint.
Regards,
Pawar A.R
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment