Wednesday, December 22, 2010

Re: [MW:8877] ELECTRODE

Dear Mr Praveen,
Thanks your reply
As per Wps E316l for clad layer and E309l for barrier layer.
can we allow E309 for clad layer?

Thanks
Kumar
On 12/22/10, praveen alavandar <praveenakds@yahoo.com> wrote:
> Dear Kumar,
>
> I did not understand your question right,
>
> Do You need to change the second layer electrode from E 316L to E 309L or
> vice versa?
>
> Regards,
>
> Praveen
> Sr.Welding Engineer
> Muscat
>
> --- On Wed, 12/22/10, KUMAR <kumartkp@gmail.com> wrote:
>
>> From: KUMAR <kumartkp@gmail.com>
>> Subject: [MW:8866] ELECTRODE
>> To: materials-welding@googlegroups.com
>> Date: Wednesday, December 22, 2010, 10:25 AM
>> Dear sir,
>>
>> In weldoverlay smaw process welding, the
>> changing electrode E309L in
>> place of E316L is acceptableor not? It
>> mentioned in WPS that E309L
>> is for barrier Layer and E316L for clad layer
>>
>> Thanks and regards
>> M.Kumar
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members
>> personel views and meant for educational purposes only,
>> Users must take their own decisions w.r.t. applicable
>> code/standard/contract documents.
>>
>
>
>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...