E309-L and E316L are both same F number(5) and A number (8),SFA number 5.4. So it is acceptable.
Thanks & Regards,
(Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Wed, 12/22/10, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:
From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
Subject: RE: [MW:8868] ELECTRODE - Change in AWS classification for weld overlay
To: "'materials-welding@googlegroups.com'" <materials-welding@googlegroups.com>
Date: Wednesday, December 22, 2010, 12:09 PM
Each AWS classification of A-No. 8 analysis of table QW-442, shall require separate WPS qualification (QW404.37). -----Original Message----- From: materials-welding@googlegroups.com [mailto: materials-welding@googlegroups.com] On Behalf Of KUMAR Sent: Wednesday, December 22, 2010 10:26 AM To: materials-welding@googlegroups.comSubject: [MW:8866] ELECTRODE Dear sir, In weldoverlay smaw process welding, the changing electrode E309L in place of E316L is acceptableor not? It mentioned in WPS that E309L is for barrier Layer and E316L for clad layer Thanks and regards M.Kumar Filtered by Hosted Filtering -- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding+ unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment