Dear All,
Please refer to ASME Sec. IX edition 2010 in which no “S” number classification specified. All S number has been indicated with respective P number classification. In fact some of EN and JIS materials and ISO equivalent group number also specified.
Regards,
L. Prabhu kumar.
From:
Sent: Wednesday, December 22, 2010 9:43 AM
To:
Cc: Yul Tagalog; Jaffar A Alfardan; Jamal Budeiri; Ala Saket
Subject: RE: [MW:8867] Welding between A106 Gr.B and API 5L Gr.B
No, API 5L Gr.B is S1 group and will not cover the P1. So he has to qualify the PQR.
P1 covers S1 but S1 will not cover P1. QW 420.2
With Kind regards,
S.Elumalai.
From:
Sent: Tuesday, December 21, 2010 6:54 PM
To:
Cc: Yul Tagalog; Jaffar A Alfardan; Jamal Budeiri; Ala Saket
Subject: Re: [MW:8859] Welding between A106 Gr.B and API 5L Gr.B
In accordance with ASME IX, (ASTM 106 Gr B) and (API 5L Gr B) have the same P-no and therefore , you don't need to qualify new WPS it covers BOTH.
Regards,
Sohaib
From: Elshan Feyzullayev <elshan_f@hotmail.com>
To:
Sent: Tue, December 21, 2010 2:14:06 PM
Subject: RE: [MW:8858] Welding between A106 Gr.B and API 5L Gr.B
in accordance ASME IX 2001 edition QW 420.2 you can use this WPS for welding of ASTM 106 Gr b to API 5L Gr B.
regards,
Elshan.
> -----Original Message-----
> From:
> Sent: Tuesday, December 21, 2010 4:14 PM
> To: Materials & Welding
> Subject: [MW:8853] Welding between A106 Gr.B and API 5L Gr.B
>
> Dear All,
>
> One of my contractor submitted and wps/pqr for approval for welding
> between A106 Gr.B and API 5L Gr.B pipes.
>
> The Wps is prepared newly for this project and PQR is from old
> projects.
>
> I reviewed and i found that the PQR is done for API 5L PSL1-Gr.B to
> API 5L PSL1-Gr.B.
>
> Is it possible to prepare the wps for A106 Gr.B and API 5L Gr.B pipes
> based on the above PQR.
>
> Please reply.
>
> Thanks.
>
>
> Filtered by Hosted Filtering
>
>
> --
> To post to this group, send email to
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment