Sunday, December 19, 2010

Re: [MW:8809] ACCEPTANCE STANDARD FOR PRESSURE VESSELS

For qualification of welders & welding operators follow only ASME sec IX acceptance, and more over qualification test are being given with ref to qualified WPS, and no impqct for welders, it is only for procedures
Dear Members, ur active participation is highly appriciated and at the same time , request members to give almost correct answers otherwise it will mislead
Thanks
Pandithan
In-Charge/Welding Technology
Cethar Vessels Ltd


 
On Sat, Dec 18, 2010 at 3:05 PM, KUMAR <kumartkp@gmail.com> wrote:
Dear Sir,

In pressure vessel fabrication during welder and welding
qualification, which acceptance standard  we should follow for
mechanical test and weld visual inspection  whether ASME SEC VIII OR
IX.

--
Thanks & Regards
M.Kumar

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...