Thursday, December 16, 2010

Re: [MW:8767] UTS

In theory both will have same UTS. But while testing, slight variation may be there due testing conditions.

2010/12/16 Shaunak Upadhyay <shanupadhyay@gmail.com>
1)  Material Specifcaiton: SA 516 GR 70
    Size: 6.0 mm thk
             300 mm Length x 300 mm Width
    Process: GTAW
    Consumable: ER70S-2

2)  Material Specifcaiton: SA 516 GR 70
    Size: 6.0 mm thk
             300 mm Length x 300 mm Width
    Process: SMAW
    Consumable: E7018

Which test piece have more UTS in these two processes.

Regards,
Shaunak Upadhyay

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
regards,
Harish.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...