Sunday, December 12, 2010

Re: [MW:8702] impact test specimen requirement

Mr Azmi,
 
Please refer to ASME Section VIII UG 84 Clause h (for thickness above 38mm - atleast 3 sets - 1 HAZ and 2 Weld) and it may further depend on welding processes you use and what client you are targetting.
 
Regards

On Sat, Dec 11, 2010 at 9:49 AM, asad azmi <azmiasadayub@gmail.com> wrote:
Dear All,
 
Greetings.
 
for a vessel to be fabricated as per ASME SEC VIII DIV 1.
 
Shell Plate material  -  SA  387 GR 12 CL2   80 THK,
 
pls inform me how many minimun test specimens are required for  IMPACT Testing for test coupon.
 
 
Regards
 
Asad Azmi

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...