Sunday, December 12, 2010

Re: [MW:8695] impact test specimen requirement

Dear Asad,
               One set of charpy is fine. Either longitudinal or tranverse orientation.

2010/12/11 asad azmi <azmiasadayub@gmail.com>
Dear All,
 
Greetings.
 
for a vessel to be fabricated as per ASME SEC VIII DIV 1.
 
Shell Plate material  -  SA  387 GR 12 CL2   80 THK,
 
pls inform me how many minimun test specimens are required for  IMPACT Testing for test coupon.
 
 
Regards
 
Asad Azmi

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
regards,
Harish.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...