dear friend,
tappering at least 30 degrees is to be done in the thicker base metal to be match the other base but make sure that you have approve procedure that signed by your client and meet the design thickness..
From: Vikas Bhandari <vikas.bhandari349@gmail.com>
To: materials-welding@googlegroups.com
Sent: Friday, December 10, 2010 5:20:22 PM
Subject: [MW:8668] welding of dissimilar thickness
Dear all
there is 22 Chrome pipe (18.3thk) to pipe flange welding(14.3 thk mm). What are the precautions that need to be taken for welding them? How would be the edge preparation done for the thicker pipe?
Best regards
-- To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment