Re: [MW:8648] Acceptance criteria in alloys in pmi testing below specified limits

Hi

What is the material form you are referring to of SS316L: plate, pipe, forging,fitting, welds,....... ??

As per that you have to refer relevant standard for acceptance criteria.

Regards

Prem Nautiyal

On Thu, 09 Dec 2010 17:26:35 +0530 wrote
>Dear All, can u tell me what is the acceptance criteria for the Ni,Cr

& Mo content below specified values in pmi testing in SS316 L

material.And which standard relates to it.How much deviation we can

accept. SDM





--

Thanks,

S.D.Mishra

Mob- 09589444897 (M.P./C.G.)

09766916581 (Maharastra)



--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



PREM S NAUTIYAL
CELL : 9769316004

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.