You can refer BS 3900 "Methids of test for paints" for all test methods on paints.
martin.
> Date: Tue, 7 Dec 2010 23:10:44 -0800
> Subject: [MW:8594] Adhesion test
> From: nss2410@gmail.com
> To: materials-welding@googlegroups.com
>
> Hi friends,
>
> For conducting a ashesion test in the structural
> steel 3coat paint system,which code is to be used .pls guide me.
>
> with thaks,
> sundaram
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
Re: [MW:34913] Filler wire
E71T-1C is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment