Wednesday, December 1, 2010

Re: [MW:8463] heating and cooling rate for the heat treatment

please check on following details.
ASME SECIII Div-1
1.PWHT & PROCEDURE: UW-10/40
2.REQUIREMENT OF PWHT- UCS-56
3.H.T. & MATL TEST COUPON-UCS-85
4.PWHT NF/HA/CL:UNF-56/UHA-32/UCL-34
5.H.T. AUSTE. CR-NI STEEL: UHA-105(NM)

SDM

On 12/1/10, marcelo soares ribeiro <marceloinspetorn1@gmail.com> wrote:
> RIO DE JANEIRO, 1st DECEMBER
>
> dear sirs
>
> can anyone suggest where meet heating and cooling rate for the heat
> treatment in code ansi/asme B31.3?
>
> best regards
>
> marcelo s. ribeiro
> welding inspector-level 1
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>


--
Thanks,
S.D.Mishra
Mob- 09589444897 (M.P./C.G.)
09766916581 (Maharastra)

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...