Skip to main content

[MW:8721] CALL FOR PAPERS--INTERNATIONAL WELDING CONFERENCE 21-22ND JULY 2011 AT CHENNAI

By Materials & Welding

 

 

From: chander bhushan girotra [mailto:chandergirotra@gmail.com]
Sent: Monday, December 13, 2010 10:51 PM
Subject: CALL FOR PAPERS--INTERNATIONAL WELDING CONFERENCE 21-22ND JULY 2011 AT CHENNAI

 

Forwarded to those in my contact list.

 

 

Regards

 

C C Girotra

convenor

iiw2011

============================================================================================================================
Dear Sir,
 I am pleased to inform you that the IIW-India will be hosting International Conference entitled “Global trends in Joining, Cutting and Surfacing Technology†in conjunction with the 64th Annual Assembly of International Institute of Welding (IIW), during 21-22 July at Chennai Trade Centre, Chennai, India. The technical sessions will span two days and there will be a welding exhibition held during the same period.
This objective of this international conference is to provide a dynamic forum for exchange of knowledge; and to provide an opportunity to meet and network with leading experts from industry, academia and research institutions from around the world, to share and enhance the knowledge base in welding science and technology, and further serve for fulfilling the missions of their organizations. A large number of delegates are expected to attend from many countries in the Asian Pacific Region, other than the member countries of IIW throughout the world.
On behalf of the organizing committee, I am pleased to invite you to participate by presenting technical papers based on your original work and experience. The topics could be any of the following:

·         Weldability of materials and Consumables
·         Welding/joining processes and equipment
·         Welding & Cutting Management
·         Inspection and testing
·         Special Welding & Fabrication Processes
·         Computer-aided welding engineering
·         Education and Training
·         Design and manufacture of welded structures
·         Soldering and Brazing
·         Robot and automation of welding fabrication
·         Environment & Safety
·         Hard-facing & surface engineering
·         High energy density processes
·         Market Development & Strategy

 
The Important Dates
Submission of Abstracts (300 words): March 7, 2011
Notification of Acceptance: March 31, 2011
Submission of camera-ready manuscript: May 15, 2011
Last date for Author Registration: April 30, 2011
 
More details are available at http://iiw2011.com/. The abstracts of paper may be sent by email to:
Chairman, Technical Committee, IC 2011
E-mail: iiw2011conf@gmail.com
 
Looking forward to a positive response.
 
Best Regards,
 
D V Kulkarni
Chairman, Technical Committee
 
 
 

 

Larsen & Toubro Limited
www.larsentoubro.com

 

 

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


Comments

Post a Comment

Popular posts from this blog

Re: [MW:34105] SA266 GR4N 4 Cycle SPWHT

By Materials & Welding
Hi,  You are correct, Minimum refers to the one cycle for which this part will expose until final work shop PWHT. hence mill test certificate shall include this.  Max. SPWHT, refers to additional cycles of heat treatment that are reserved for future repairs during equipment lifetime.  Again, these simulated no. Of cycles shall be specified in MTC.  The idea is we need to make sure that steel mechanical properties are not compromised upon exposure to multiple repairs (i e 4 cycles in your case).  One could say, if steel is subjected to 4 cycles and is ok, then it should by defacto be good for one cycle, yet, this is wrong assumption cause mechanical problems and microstructure of materials varies accordingly based on no. Of cycles for which material will expose. This is apparent in alloy steel and especially for impact test values as an example.  In your case, this forged CS with properties before PWHT can be understood to be " as forged" condition (i.e. Wit...
Post a Comment
Read more

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more