Thursday, November 25, 2010

RE: [MW:8375] Hydrotesting Pressure gauge calibration

Some Client – ARAMCO requires every 30 days. Please check your client spec also.

 

With Kind regards,

S.Elumalai.


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Karthik
Sent: Thursday, November 25, 2010 10:13 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:8373] Hydrotesting Pressure gauge calibration

 

Hi,
Pressure gauge calibration time shall be in every 6 months as per the normal practice and various project specifications.

Thanks & Regards,

 

(Karthik)

 

Karthikeyan.S

QA/QC Manager

Getabec Energy Co.,Ltd.

379,Moo6,Soi8,Nikhomphatana,

Rayong-21180,

Thailand.

Phone: 0066 38 897035-8 (Off)

Fax: 0066 38 897034

Hand Phone: 0066 892512282



--- On Thu, 11/25/10, Praveen Kumar <praveenkumar.sek@gmail.com> wrote:


From: Praveen Kumar <praveenkumar.sek@gmail.com>
Subject: [MW:8372] Hydrotesting Pressure gauge calibration
To: materials-welding@googlegroups.com
Date: Thursday, November 25, 2010, 1:22 PM

Dear All,

 

Can you pls Suggest as the Piping Hydrotesting Pressure gauge calibration period of time,

and also is there any code/stds governing for this.

 

 

 

Regards,

 

Praveen Kumar

Mechanical Engineer

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...