Thursday, November 18, 2010

Re: [MW:8311] pwht

 
PWHT above tempering temperature reduces the impact properties of thelow-ally steel,it may lead to stress-rupture failure in the hAZ area,if you are thinking of avoiding PWHT above tempering temperature you may go with temperature below 700deg,i.e 693-695 and prolong your soaking time .

On Wed, Nov 17, 2010 at 9:14 PM, thulaib arakkal <thulaibwelding@gmail.com> wrote:
hi friends, in our contract specification it says, pwht temperature should be less than tempering temperature of the material (ASTM A335 GrP-11). why is this requirement. our P11 pipes have tempering temperature of 700 deg celsius ,and as per our WPS pwht temp is 720 deg celsius.. So is it okay to do pwht at 720 deg celsius. will there be any problem if PWHT temperature exceeds tempering temperature

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...