Hi, No.Welder need requalification for Overlay welding.welder shall be requalified for each 6 months of each welding process.If he has not do welding in 6 months on any qualified process his qualification will be discontinued on the particular process.
Thanks & Regards,
(Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Mon, 11/15/10, Shadab Alam Ansari <ansari@ghi.com.sa> wrote:
From: Shadab Alam Ansari <ansari@ghi.com.sa> Subject: [MW:8282] ASME SEC-IX CONTINUITY REQUIREMENT To: materials-welding@googlegroups.com Date: Monday, November 15, 2010, 8:07 PM
Dear All, Can any one define how to go for continuity of the welders? What are the criteria for continuity other than 6months qualification. If a welder is qualified in SMAW process for Both Groove welding and CRO and his qualification date has exceeded 2 years and he is continuously welding for Groove welding but for more than he has not done overlay welding. Is he qualified for Weld Overlay? Thanking you, Best regards, Shadab -- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding+ unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment