Sunday, November 14, 2010

Re: [MW:8261] Electrode calculation

Some more

arun

On Sat, Nov 13, 2010 at 2:14 PM, Sundaram Elumalai <Elumalai.Sundaram@starfab.com.sa> wrote:

Here some input.

 

 With kind regards,

 

 Malai.

 

 



From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of M.Shankar
Sent: Saturday, November 13, 2010 10:05 AM

Subject: Re: [MW:8237] Electrode calculation

 

Hi

 

Refer attachments & refer below sites,

 

 

You may also do a practical real time weld with appropriate settings and tabulate your results, however calculations suggested.

 

 

 


From: Shadab Alam Ansari <ansari@ghi.com.sa>
To: materials-welding@googlegroups.com
Sent: Sat, 13 November, 2010 12:50:21 PM
Subject: [MW:8230] Electrode calculation

Dear All,

How to calculate weight of electrode required for a joint?

What are the factors considered for calculating the Electrode consumption for a particular joint and what are their coefficient factors?

Thanking you,

Best regards,

Shadab

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
அருணாசலம்
கலைவாணி
சுதர்ஷனா
வருண்


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...