Dear Mister Soman,
Please google on alutite.
Alutite is a soldering method for repairing aluminium, which can be done wirh a normal flame what means lower heatinput.
If you cant find it please let me know.
Best regards,
Huib van den Tol
2010/11/11 <donboscomarine@vsnl.net>
November 11, 2010
Dear Friends,
The attached is a report of the repairs carried out on a Vintage Car's Engine's cylinderhead and the continuing problems of the same. The material is cast Aluminium and being a vintage car, replacements are not available. Cutting the present cylinderhead for making moulds for casting not acceptable to owner due to the risk of losing the cylinderhead for good ! We have described the problem and seek advice about Probable Solutions.
Thanks in advance & B. Rgds.
G. A. Soman
Principal
DON BOSCO MARITIME ACADEMY
Premier Automobiles Road,
Kurla West, Mumbai 400070
Tel: (022) 2504 1585 / 2018; 25036344. Fax: (022) 2504 0682
Email: donboscomarine@vsnl.net
Website: www.dbma.in
Mobile No: 9819451277 --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment