hi,
first say whether the said welder is performing welding? if so take a RT ON THE JOB and qualify code permits. if the welder performs welding continuosly without any repair qualification may be performed based on his RT or UT as per job requirement. you can revalidate the certificate.
On Wed, 10 Nov 2010 12:12:25 +0530 wrote
>
Greetings,
Code: ASME IX
Process: GTAW
Diameter: DN50
Specs: ASTM A106
Qualification Status: expired
As per QW 322.2
Providing the conditions of QW-304 and QW
305 are satisfied, renewal of welder qualification under QW-322.1(a) may be
done on production work.
QW 304
Alternatively, welders making a groove weld using SMAW, SAW, GTAW, PAW, and
GMAW (except for short circuit mode) or combination of these process maybe
qualified by radiograph examination,
Does this sentence applied if the welder has welded
the following 3 months prior to his expiration
of his ASME qualification, welding as per below:
Code: DNV-OS-F101
Process: GTAW
Diameter: DN50
Grade: DNV 450
Can the welder renew his qualification on production work
as per QW 322.2, under this circumstances?
Does this production work means that it is the work that
needs qualified welders to do the work?
Thank you in advance.
Cheers,
Larry
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
Dear Sir,
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment