Re: [MW:8161] WQT- (1G/PA) progression issue

Hi Limesh

Uphil or down hill doesnt refer to 1G. It refers to 3G, 5G or 6G. 

U may write'' not applicable'' in your inspection report

regards

On Tue, Nov 9, 2010 at 11:55 AM, Vikas Bhandari <vikas.bhandari349@gmail.com> wrote:

HI Limesh

Uphill or downhill does not refers to 1G postion. It refers to 3G, 5G ,  

On Mon, Nov 8, 2010 at 10:17 AM, limesh M <limesh78@gmail.com> wrote:

Dear All,

 

I want to conduct welder qualification test on plate in flat position(1G/PA).In this case what is the progression I have to mention in the visual inpection report.ie, Uphill or Downhill or any other terminology?I am clueless,please advise.

 

Regards,

 

Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.