Monday, November 8, 2010

Re: [MW:8140] Re: Regarding Hardness Max & Min Value

Dear Mr.Israr,
As per Nace MR0175 hardness limit for Weld is 22HRC(236BHN)MAX.For  CS flanges as per ASTM A105-- 187BHN MAX,for  CS fittings,ASTM A 234WPB-- 197BHN MAX.


 
On Sun, Nov 7, 2010 at 5:41 PM, israr <ahmedisrar.nm@gmail.com> wrote:
Dear Mr. Ahmed,

As per Nace MR0175 Hardness should not be more than 22 HRC or 187
BHN.To avoid SSC and HIC in shore service.

Regards
Israr Ahmed
Tata Projects Ltd. India

ahmed wrote:
> Dear Friends,
>
>
>
> I want to know that
>
>
>
> What is max & Min value of Hardness BHN for NACE C.S. material A106
>
>
>
> Thanks to all
>
>
>
> Waiting for ur reply
>
>
>
> Best Regards,
>
> Shaikh Ahmed . k .
>
>  QA/QC Engineer
>
> COSTAIN ABU DHABI COMPANY.W.L.L
>
> (A division of Costain Oil & Gas Process Limited, Manchester, UK)
> P.O. Box no: 3069
> Abu Dhabi-Das Island
> United Arab Emirates
> * Email :ahmed@costaindas.ae
>
> Mobile:     +971-567090644
> * Tel:      +971-2-6063850 (Ext:216)
>
> Please visit  <http://www.costain.com/> www.costain.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
With Warm regards,

G.Padmanabhan
+96895685853

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...