YOU CAN ACCEPT THE MTC IF IT DOES HAVE THE SAME F-No
Dr. G. Dilintas - Authorized Inspector Supervisor
I&F Regional Technical Manager
Bureau Veritas Piraeus - Greece
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
limesh M <limesh78@gmail.com>
Sent by: materials-welding@googlegroups.com 03/11/2010 09:19
|
|
Dear All,
Design Code- ASME B31.3
Welding Code - ASME SEC IX
Process - GTAW+SMAW
I have a WPS which is qualified with PWHT and impact test.Now I have to review some consumable MTC.I need advise on the following queries.
1.Is it mandatory that the consumable MTC shall show the mechanical test values with PWHT for acceptance ?
2.Can I accept consumable MTC which is matching with corresponding SFA and material properties with out PWHT?
Regards,
Limesh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment